The P10 - The largest and most advanced high-end AC power regenerator on the planet, the P10 is pure state of the art. Capable of powering any size system with pure sine wave power, nothing comes even close to a P10.

When the status quo isn’t good enough
You’ve spent anywhere from a significant personal investment to a small fortune on your love of music, on your desire to have the best home theater experience possible. And - even though the best equipment has power supply regulation built in - your utility company isn’t helping you. You NEED good, stable, reliable AC but unfortunately the power coming into your home is distorted, dirty, unregulated and deteriorating the performance of your system. Now you don’t have to worry about that anymore.

The PS Audio’s Power Plant AC regenerator takes the power you’re given from the utility, converts it to DC and then regenerates brand new and perfect power once again. For more than 13 years the Power Plants have been producing perfect AC all over the world, helping audio- and video-philes and people who simply want better results from their investment achieve the best their equipment can provide.


Why do you need a Power Plant?
Everything we hear in an audio system is, in one form or another, modulated AC power. Everything we see in a video system is also built on AC power. We can put one band-aid after another on what the utility company sells us, but ultimately our love of listening to recorded music in the best form possible is limited by the quality of that one source. It’s the foundation on which an audio/video system is built.

And what we’ve learned as an industry over the 50+ years that high-end audio has been evolving is: that power we buy is none-too-reliable, and unfortunately far more often than not, very poor quality. The PS Audio Power Plant is an affordable reboot of that limitation - using the supplied power only to run, it provides a stable and near-perfect AC sine wave, freeing up your components to do their best work. It has been called the single most important piece of equipment in an A/V system. With a PS Audio Power Plant as the essential building block, your system will always be able to perform at its best.

The P10 helps keep your system running and everything green
Our new network technology on board provides unprecedented control and monitoring of all your connected devices.Automatically reboot routers, modems, and network devices when Internet dropouts occur. Schedule devices to power on and off automatically optimizing power consumption in your system. Receive emails automatically when power occurrences occur, as the PerfectWave Premier P10 is automatically reacting on it’s own; all made possible by PS connected technology and PS Audio’s unique Globalnet servers.

Once your system is powered by a P10 Power Plant all you or you need to do is go to the web through any web enabled device, including a Blackberry or iPhone, and access the P10’s control panel if you wish. From the P10’s control panel any connected equipment can be rebooted, turned on or off, or have its status checked. It’s that simple.


Monitor your system’s heartbeat
The P10 will monitor your power line quality and report any problems to you through the web page, text alerts or emails sent anywhere you wish. It’s up to you. The P10’s real-time and on-line measurement system includes surges, voltage levels, power usage and power quality as measured by THD (Total Harmonic Distortion) on the line.
The data is stored on our servers and available via the web interface for the P10. Customers and their designated dealers can look at power quality over time, or drill down to specific times of day to find out if there’s a problem involving the home’s power. Our research over the years has shown that sagging voltages, high distortion and multiple brownouts are occurring more than one might think. With the installation of a P10 in the system, you can accurately record events and present them to the utility company for repair or just keep a log.

Go Green!
With a P10 system installed, not only can you check system and power line status from anywhere in the world, get emails sent to you from the device (if you want) and be assured you’re always connected to the internet, but you will also be able to go a lot greener than ever before.

The P10 will allow you to schedule system ‘vacations’ or down time so you’re not burning power when you don’t need to. This can be in the middle of the night, or when you’re on vacation and when you’re ready, the P10 turns everything back on for you zone-by-zone. Perhaps there are a few critical components you want to remain on, but others are OK to shut down and save power. No problem.

To access this feature there is a simple graphical calendar. Simply click on the dates you want the system to turn off and the dates you want it to come back on and everything will be ready for you upon your return. You can schedule your equipment (some or all) to be warmed up and ready to. And if your equipment needs an IR command to actually get it out of standby, that’s no problem either. The P10 can easily send IR commands on schedule as well.

Tags: PS Audio, Power